VULCAN LOGO05 SMALL.gif (4097 bytes) home.gif (1520 bytes) sm_shimmy.gif (5067 bytes) sm_shimmy_die.gif (6168 bytes) sm_vulcanair.gif (5577 bytes) sm_brehmt.gif (5284 bytes) sm_ringmaster.gif (5028 bytes) SM_ultimate.gif (5641 bytes)
RINGMASTER HIGH SPEED AUTOMATIC TUBE CUTTER
Featuring Brehm Supported Shear Technology
  • High Production -- High Speed Cut-off
  • Fully Automatic
  • No material loss between cut pieces
  • Commercially burr-free, with little to no distortion
  • Cuts length to tolerances in thousandths
  

 
  • High speed cut-off of tubing ranging from 1" OD up to 4" OD
  • Adjustable for cutting Lengths in most diameters from 2-1/2 times the wall thickness up to 10"
  • Capable of cutting up to 1.9 square inches of mile steel at 1500 psi
ringmaster.jpg (20395 bytes)
STANDARD FEATURES:
  • Scrap separator
  • MicroCentric Quick Change Feed Collets
  • Quickpanel Programmable Touchscreen Operator Interface
  • Additional Magazine Rack and Bundle Loader Options Available

shown 4" Heavy Wall
RINGMASTER
PRODUCTION
CAPACITY EXAMPLE:
The figures below are based on actual rates for cutting .150"" material and will vary slightly with increased or decreased wall thicknesses. Loading is automatic and continuous.

Cut Length
Pieces per hour
1/2"
1"
3"
6"
8"
10"
 3,900
3,700
2,650
1,750
1,450
1,400

 

 

 
TUBE CUTTING
CAPACITY EXAMPLE:
The maximum wall thickness that can be cut in the tube diameters is governed by the construction of the tooling. It should not exceed the hydraulic cutting capacity of each machine. The following are maximum wall thickness for cutting mild steel
Tube
OD		 Maximum
Tube Wall
1"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"

 .250
.375
.332
.259
.214
.182
.158