VULCAN LOGO05 SMALL.gif (4097 bytes) home.gif (1520 bytes) sm_shimmy.gif (5067 bytes) sm_shimmy_die.gif (6168 bytes) sm_vulcanair.gif (5577 bytes) sm_brehmt.gif (5284 bytes) sm_ringmaster.gif (5028 bytes) SM_ultimate.gif (5641 bytes)
BREHM HIGH SPEED AUTOMATIC TUBE CUTTER
Featuring Brehm Supported Shear Technology
 
  • High Production -- High Speed Cut-off.
  • Fully Automatic.
  • No material loss between cut pieces.
  • Commercially burr-free, with little to no distortion.
  • Cuts length to tolerances in thousandths.
  • Each model cuts sizes up to the specified OD

 

  

 

 
  • Standard machine cuts to length from under 1" up to 24".
  • High speed cut-off of tubing ranging from 1/2" OD up to 6" OD.
  • Brehm model sizes include: 2-3/4", 3-1/2", 4-1/2", and 6" size.
brehm_cut.jpg (17404 bytes)
OPTIONAL FEATURES:
  • Scrap Separator
  • ID Oiler
  • Quickpanel Programmable Touchscreen Operator Interface
  • Sony Digital Length Adjustment
  • Servo Driven Length Adjustment
    (Requires the Quickpanel Option)

shown 3-1/2" Model with Quickpanel Option
BREHM
PRODUCTION
CAPACITY EXAMPLE:
The figures below are based on actual rates for cutting .062" material and will vary slightly with increased or decreased wall thicknesses. Loading is automatic and continuous.

Cut Length
Pieces per hour
1"
2"
3"
4"
6"
8"
12"
16"
18"
20"
24"
 5,712
5,331
4,774
3,988
3,458
3,009
2,278
1,715
1,445
1,204
805
TUBE CUTTING
CAPACITY EXAMPLE:
The maximum wall thickness that can be cut in the tube diameters is governed by the construction of the tooling. It should not exceed 8% of the tube OD or the hydraulic cutting capacity of each machine. The following are maximum wall thickness for cutting mild steel
2-3/4" MODEL 4-1/2" MODEL
Tube
OD		 Maximum
Tube Wall		 Tube
OD		 Maximum
Tube Wall
3/8"
5/8"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
2-3/4"

 .030
.050
.080
.100
.120
.110
.095
.075
.065

 1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4-1/2"

 .080
.100
.120
.160
.200
.170
.145
.125
.110